You use the Power button to power the VISTA Body Camera on and off.
The Power button is on the bottom of VISTA, VISTA WiFi, and the VISTA XLT DVR.
To power on:
|The camera goes through its booting and information sequences. When it is ready to use, the display shows the number of events in storage and the green LED lights steadily.|
Tip: (VISTA XLT) Press the Display Backlight button to move through the information sequence screens.
(VISTA XLT) If the camera sensor is not connected to the DVR, the display reads Camera UNPLUGGED. When you connect the camera sensor to the DVR, the display reads CONNECTING, then shows the number of events in storage and the green LEDs light steadily.
To power off:
- With the power on, press and release the Power button two times within 5 seconds.
After you press and release the Power button the first time, the display reads OFF? 2X (VISTA and VISTA WiFi) or OFF? Press Again (VISTA XLT) to confirm that you want to power the camera off.
Once you press the Power button the second time, the display reads SHUTTING DOWN and the green LED turns off.
Important! If you do not press the Power button the second time within 5 seconds, the display clears, and you will need to start the power off sequence again.
|Previous - Wearing VISTA XLT||Top of Page||Next - Associating with a Recording Group|