Typically, you use the Record Start/Stop button to start or stop a recorded event. The Record Start/Stop button is on the front of VISTA and VISTA WiFi. VISTA XLT has two Record Start/Stop buttons, one on the front of the DVR and one on each camera sensor.
Note: If your VISTA WiFi or VISTA XLT is a member of a recording group, the camera can start or stop an event automatically in certain scenarios. For more information, see the VISTA HD Wearable Camera User Guide.
To start a recording:Press a Record Start/Stop button. (VISTA/VISTA WiFi) The display shows the REC icon and the recording length, then begins to blink the REC icon. The red LED lights steadily. (VISTA XLT) The display reads RECORDING, then begins to blink the dot in the REC icon and show the recording length. The red LEDs light steadily. To stop a recording:Press a Record Start/Stop button. The REC icon turns off on the display and the red LEDs turn off. |
![]() |
|
![]() |
Note: You may need to press the Record Start/Stop button a second time within 5 seconds to confirm the event stop, depending on your configuration.
source: WGD00119revF
Previous - Associating with a Recording Group | Top of Page | Next - Categorizing a Recorded Event |